Por favor, use este identificador para citar o enlazar este ítem:
https://repositorio.uleam.edu.ec/handle/123456789/6899
Título : | Hormigón para pavimento rígido incorporando fibras de bambú como adición de origen natural. |
Autor : | Navarrete Benítez, Ayline Dayanna |
Palabras clave : | HORMIGÓN BAMBÚ FIBRAS DE BAMBÚ SOSTENIBILIDAD ADICIÓN PROPIEDADES MECÁNICAS RESISTENCIA A LA COMPRESIÓN RESISTENCIA A LA FLEXOCOMPRESIÓN |
Fecha de publicación : | 2024 |
Citación : | Navarrete Benítez, A. D. (2024).Hormigón para pavimento rígido incorporando fibras de bambú como adición de origen natural. (Tesina). Universidad Laica Eloy Alfaro de Manabí, Manta, Ecuador. |
Citación : | ULEAM-IC;0122 |
Resumen : | This research analyzes the use of bamboo fibers as reinforcement in the concrete mix for rigid pavements. It seeks to determine whether the incorporation of these fibers into the concrete improves the minimum compressive strength of f'c=280 kg/cm^2 and flexural compression with a minimum strength of f'c=40 kg/cm^2 compared to conventional concrete. The study includes the design of mixtures with different proportions of bamboo fibres (2%, 3.5% and 5%) using the ACI method, the performance of laboratory tests at 7, 14, 21 and 28 days, following ASTM standards for the compression test and the flexural test of the joists. In addition, a comparative analysis was carried out between conventional concrete and concrete containing the addition of bamboo fibres. The results showed that bamboo fibers reduce compressive strength by up to 13.3% with the lowest percentage of fiber addition, but improve flexural compression strength, especially with the 2% dosage, obtaining an increase of 44%. Therefore, it is necessary to optimize its treatment to improve its performance in concrete mixtures. |
Descripción : | La presente investigación analizó la adición de fibras de bambú como refuerzo en la mezcla de hormigón para pavimentos rígidos, para determinar si mejora la resistencia a la compresión mínima de f'c=280 kg/cm^2 y a la flexocompresión con una resistencia mínima de f'c=40 kg/cm^2 comparándolo con el hormigón convencional. |
URI : | https://repositorio.uleam.edu.ec/handle/123456789/6899 |
Aparece en las colecciones: | INGENIERÍA CIVIL |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
ULEAM-IC-0122.pdf | TESINA | 201,29 MB | Adobe PDF | Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.